Create a water reserve in record time with the removable Water-Gate water barrier. The optimal solution for fire suppression or agricultural irrigation.
The Water-Gate removable water barrier creates water reserves to help extinguish fires in rural locations far from fire hydrants.
The Water Gate removable water barrier adapts to any type of natural watercourse without exception. It uses ground relief, whether at different levels or unevenness, for better water retention in case of fire.
Temporarily blocking a stream or small river is an extremely time-consuming and arduous task. In addition, it may be illegal to do so depending on the environment.
The Water-Gate water barrier is the only real solution to this problem and at a reasonable cost. After the first year, your barrier will pay for itself, and you will be able to use it for decades to come.
The Water-Gate water barrier doesn’t need to be filled with water, as the water from the stream or river will enter the barrier and open it automatically.
In addition, because of its triangular configuration, the Water-Gate water barrier cannot turn over when filled with water and will therefore remain stable.
No, using the Water-Gate water barrier is very simple and doesn’t require any special skills.
However, we invite you to try it out in a small stream to see how easy it is to build a powerful water supply with little effort.
To install the Water-Gate water barrier:
To remove the barrier, simply remove the rocks from the front of the flap and lift one corner of the barrier flap, allowing water to flow under the barrier. The barrier will slip to allow water to flow through. You can then pull it out of the water, unfold it, fold it, and roll it. It's that simple!
Regardless of the size or capacity of your pump, there is no danger that your pump’s nozzle installed on the barrier flap will remove the fabric.
The water drawn in will be free of grit and dirt. This is a definite advantage of using the Water-Gate water barrier whenever you need to create a water reserve. You will save wear and tear on your pump impellers and other components.
If the water level is low and you want to eliminate the vortex that is created above the pumping nozzle, then you can place the nozzle inside the water barrier.
Speak to one of our representatives to receive an evaluation tailored to your needs or to schedule a demonstration.